- Fear not, for the Freya Gun Magnet Mount is here to save the day!
- Introducing the Freya Gun Magnet Mount, the innovative gun accessory that combines a magnetic gun rack with trigger protection.
- With a strong magnet, versatile mounting options, sturdiness, easy installation, trigger guard protection, and compatibility with popular firearms, the Freya Gun Magnet Mount is the perfect solution to all your firearm storage needs.
100% No-Risk Replacement Guarantee
⭐⭐⭐⭐⭐
- First and foremost, let's talk about the star of the show: the magnet. This isn't your average run-of-the-mill magnet. No, sir, this magnet is so strong it could hold up your entire gun collection and still have room for more!
- It's made of Neodyium, a rare raw earth metal material that greatly improves the mount's magnetic force and ability to bear the weight of up to 15lbs. That means it's strong enough to hold even the heaviest of firearms, such as XD Service and 1911.
- No more worrying about your firearms falling off the wall or getting knocked around in your car. The Freya Gun Magnet Mount will keep them securely in place, no matter where you decide to mount it.
100% No-Risk Replacement Guarantee
⭐⭐⭐⭐⭐
- Want to mount it in your truck, office, bedside, doorway, desk, or table? No problem! The Freya Gun Magnet Mount can be mounted anywhere you need it to be, providing easy access to your firearm at all times.
- But what good is a strong magnet if the product isn't sturdy? Fear not, for the Freya Gun Magnet Mount is built to last. Once mounted using the included screws, this bad boy isn't going anywhere. It's solid as a rock and won't budge, no matter how much you jostle it around.
- And don't worry about it damaging your firearm either. The Freya Gun Magnet Mount is made up of ABS and rubber material, which has a smooth surface to prevent scratches to your gun. Protect your investment with a high-quality gun mount that won't let you down.
100% No-Risk Replacement Guarantee
⭐⭐⭐⭐⭐
- The answer is a resounding "YES!" The Freya Gun Magnet Mount is incredibly easy to install. With the included screws and adhesive, you can have it up and running in minutes.
- No need to hire a professional or spend hours fumbling around with complicated instructions. Simply follow the easy-to-understand instructions and voila! Your firearm will be securely mounted in no time.
- And after all, we don't want any accidental discharges or misfires. The trigger guard cover will fully cover the trigger and provides additional protection from accidental discharge.
- The trigger guard cover also provides extra support to hold the gun more securely, making it safer to store in your car or in other locations. No more worrying about your firearm going off accidentally or being knocked around and damaged.
100% No-Risk Replacement Guarantee
⭐⭐⭐⭐⭐
100% No-Risk Replacement Guarantee
⭐⭐⭐⭐⭐
100% No-Risk Replacement Guarantee
⭐⭐⭐⭐⭐
At Dinosaurized, we believe our products are truly innovative and have 100% confidence in it.
We understand that buying things online can be scary with companies not staying true to their customers
So we go the extend to keep you satisfied.
We are happy to offer you a 45 day replacement guarantee with your purchase.
Please contact us firstly at support@dinosaurized.com and get your new
product if you meet any quality issues within 45 days.
100% Simple & Risk-Free process.
100% No-Risk Replacement Guarantee
⭐⭐⭐⭐⭐
"Very sturdy when mounted using the included screws. The tape won't hold it long. Mostly good for holding in a location for test fit. Adding the screws makes it rock solid. Holds everything from my Glock 26 to my 1911, these are not light firearms."
- David C. Howell, Casa Grande, Arizona
100% No-Risk Replacement Guarantee
⭐⭐⭐⭐⭐
"Got my set of holster magnets yesterday and mounted one to a board to test it before installing. Immediately when I gripped the holstered gun my magazine ejected. The clip release button was hitting the edge of the trigger guard on both my Glock 27 and Sccy 9mm. I marked where the releases were hitting and dremmel out a small notch and filed smooth. Now I don’t have to worry about it ejecting my magazine when I need it. I love the added protection of having the trigger guarded. The magnets are very strong, Im not worried about jumping a few train tracks and having my firearm fall out. Should have my new truck this week to set it up. Respect."
- Billy T., Pinal County, Arizona
100% No-Risk Replacement Guarantee
⭐⭐⭐⭐⭐
"I really like the fact that the trigger is covered, especially since I have mine on the wall. I was concerned it would be hard to remove quickly, but that is not at all an issue. Works great, especially with a Spartan Magazine Wall mount to hold your extra mags!"
Seth L., Springfield, Illinois
"Very nice solid built holster. Protects the trigger. Discreet, super strong magnet. Good option for those who drive euro cars and don't want enormous ugly holes on their beauty interiors. I mounted mine with the gun butt facing fwd because the best placement in my vehicle was closer to the seat and I didn't want the gun too close to the seat and my leg. Works fine."
Phillip Fisk, Kaysville, Utah
100% No-Risk Replacement Guarantee
⭐⭐⭐⭐⭐
100% No-Risk Replacement Guarantee
⭐⭐⭐⭐⭐
Shipping time?
- (U.S customers only) Standard shipping time is 2-10 Calendar days to ship and arrive. (Shipped from U.S, by USPS)
All packages are seriously & strictly sterilized before being sent.
- For Non-US customers, shipping time may vary from 10-20 Business days.
- We'll immediately upload your tracking code to your email after the shipment, it may take 1-4 days to be activated.
This says fits subcompacts, but there is smaller, moicros, like the 365 and hellcat.very small guns. wondering if there would be too much room for it?
- Holds a Ruger 380 just fine.
Will this scratch your gun finish? Seems like you would have to forcefully slide off the gun to remove it.
- They will not.. the magnets are behind plastic.
How strong are the magnets? It only lifted 15 lbs, but im afraid that wont be stong enough to keep my pistol securely in place while bouncing around
- I have mine in my truck and I’ve done 50 mph through a very bumpy wash and it didn’t let me down. Holds up great to everyday bumps as well as heavy off-roading
Will this accommodate a tlr 1 hl on a sig p320?
- The TLR-1 HL does not accommodate.
How far apart are the screw holes? Length and width.
- Side to side they are 3 11/16. On each side they are 23/32 apart
will the sig p365 fit in this?
- Yes
Ruger lcp .380/s&w m&p 9mm 4.25" (1st gen)/springfield xd mod 2 (hi-cap .45acp) 3.3"? will it fit all 3 of these?
- I don't think it will fit the. 45acp it may be to thick. There is a tight fit fot 9 mm. Fire arms. The 380 should fit nicely
Will this accommodate an iwi masada a 9mm pistol?
- Yes
Will this product work with a beretta px4 storm compact?
- Yes
Will these work with a cz 75 BD
- Yes
Hello, does this holder also fit a glock 19 with streamlight tlr-1 and glock 19x with streamlight tlr-1?
- I carry a Styer 40, no stream light or laser. However the trigger guard should not interfere with the stream light or security of 5he weapon in the holder. I find that when grasping the handle, twist the grip out of the holder the release is smooth and effortless.
Glock 26 gen 5?
- Yes
Will this work with a s&w bodyguard 380 / insight laser
- Yes
pocket pistol?
- Way overkill for my sa 911 .380 but does work.
Is this compatible with a Taurus Spectrum?
- Yes
Will my 9mm Taurus handgun & my 9mm smith & western
- Yes
Do do I mount to plastic (inside a car)? Do I use the anchors?
- Yes, it needs to be drill
Will it work with a wather ppk stainless steel?
- It should work the barrel and your trigger parts are made of carbon steel, if you have a very strong magnet around your house touch it to the side of your PPK and see if it sticks.
Will a .38 Special fit??
- Yes
Will this fit a Ruger American 9mm full size with the olight pl mini valkyrie
- Yes
Will this hold a Masada with tlr 8?
- No, the Tlr 8 needs to be removed.
Will the magnet magnatize the gun ?
- No
Will this work for a Springfield hellcat?
- No
Will a Glock 26 fit good?
- Yes
Will it fit a glock 17. 9mm
- Yes
Would this work for a girsan regard mc? it's almost like a m9a1.
- Yes
Will this work with a .44 magnum revolver?
- Yes
Will this product scuff, or damage the finish on my Pistol?
- No
Will this product fit a Springfield xds 9mm 3.3 subcompact pistol?
- Yes
100% No-Risk Replacement Guarantee
⭐⭐⭐⭐⭐
